Acoustical Pipe and Duct Lagging by
Sound Seal
is the best solution for wrapping noisy pipes,
ducts, valves and heat exchanges in a variety of indoor and
outdoor applications.
Sound Seal's pipe and duct wrap combines a 1 lb per
sq. ft. or optional 2 lb per sq. ft. mass loaded vinyl noise
barrier with a scrim reinforced foil facing on one
side. The reinforced pipe wrap facing accepts a matching
tape for quick and easy installation.
Commonly bonded to a 1 inch or 2 inch thick quilted fiberglass decoupler/absorber to improve acoustical performance. The
quilted fiberglass decouples the loaded vinyl noise barrier
from the noise emitting surface, creating a floating noise
barrier to achieve optimum noise reductions.
|
Acoustical lagging is
wrapped around the outside of a pipe or duct to reduce noise
that transmits through the walls or skin of that pipe or duct.
Duct liner is different; it is used inside of ductwork only to
reduce the noise that comes out of any vents or openings in the
duct.
B-10 LAG/QFA-3 is
used to reduce the noise that transmits right through
the wall of PVC piping. |
|
 |
Matching Lag Tape,
4" X 200'
for quick and easy installation of our
lag products. |
|
|
Sound Seal Acoustical Pipe and Duct Lagging is supplied
in rolls
54" X 30' long.
 |
|
Used for
wrapping
|
 |
Sheetmetal Ductwork
|
|
Valves |
|
|
VAV Units |
|
|
Heat Exchanges |
|
|
Fans/Blowers |
|
|
Iron, Steel and PVC Piping |
| |
|
|
|
|
|
 |
 |
Custom Acoustical Jackets and other Sound Seal Acoustical Wraps,
Jackets and Lagging Products
Above photo shows an acoustical jacket custom fabricated to fit
blower. Hook and loop fasteners allow for easy installation |
Industrial "BBC"
acoustical composite was used as an
acoustical wrap on large diameter piping at a Waste
Water Treatment facility. |
|
Visit Us at
Booth # 1126
Tech Data Sheets
Provide general information on our lagging
products
|
